EVCO c-pro kilo AHU - Manual (Page 75)

C-PRO KILO AHU APPLICATION MANUAL
Pag. 75
6.13.3 Pump status
Both pumps may assume any of the following operating states:
7. Disabled: the pump is not managed by the controller. In the user interface you will
see the symbol “ - ” when in this state.
8.
Off: the pump is off. In the user interface you will see written “OFF” when in this
state.
9. Waiting for shutdown: the pump is in the process of shutting down, and is in queue for
scheduled protection. In the user interface you will see written (and flashing)
“WOFF” when in this state.
10. On: the pump is on. In the user interface you will see written “ON” when in this state.
11. Alarm: the pump alarms are on. In the user interface you will see written “ALL” when
in this state.
6.13.4 Security Inputs
Thermal pump security management is provided for both configured pumps. To enable the
alarm you must go into the constructor menu and set the positions which will be connected to
the digital inputs in order to survey the security (Hd10, Hd11). In order to not activate the
security and related alarm you need to set the parameter of the position to a 0 value.