EVCO c-pro kilo AHU - Manual (Page 70)

C-PRO KILO AHU APPLICATION MANUAL
Pag. 70
6.11.7 Shutter status
In the user interface you can identify the operating status of the shutters which will present
you with one of the following:
1. Disabled: the shutter is not managed by the controller. In the user interface you will
see the symbol “ - ” when in this state.
2.
Closed: the shutter is closed. In the user interface you will see
written“CHIUSA”(CLOSED) and a value of 0.0%. when in this state
3. Opening: the shutter is in the process of opening. In the user interface you will see
written “APERTURA” (OPENING) flashing with the corresponding value when in
this state.
4. Open: the shutter is open and still at the determined value. In the user interface you
will see written “APERTA”, (OPEN) and the corresponding value of opening when in
this state.
5. Closing: the shutter is in the process of closing. In the user interface you will see
written “CHIUSURA” (CLOSING) flashing with the corresponding value when in this
state.
6. Alignment: the shutter is in the process of moving in order to align in response to the
start up of the unit or because the tension is restoring. In the user interface you will
see written “ALLINEAM.” (ALIGNMENT) with the value 0.0% flashing.