EVCO c-pro kilo AHU - Manual (Page 42)

C-PRO KILO AHU APPLICATION MANUAL
Pag. 42
6.2 Unit Type
While the machine is turned off, using the parameter PG00 in the COSTRUTTORE
(CONSTRUCTOR) Menu, it is possibile to choose the type of unit that you wish to utilize.
Based on the value of the parameters, different defualts become available for the positioning
of inputs and outputs. The regulation and other parameters which correspond to diverse
funtionalities can be modified manually according to user requirements.
To follow is a list of the machines which are managed by the respective configurations of
inputs and outputs.
Note. The default configurations can also be modified according to user requirements by
entering modifications to the paramaters manually.
ATTENTION. When changing the machine type (through modification of parameter PG00)
it is necessary to shutdown and then restart the card to ensure the unit has been correctly
configured; in order to allow the card to assign all the parameters contained therein it is
advisable to wait a few seconds (3 seconds should be more than sufficient) before removing
the tension.