Toshiba LF494 - Manual (Page 94)

TOSHIBA
6 F 8 A 0 7 7 4
*In case of forgetting password (reading out password)
Proceed as folJows tcj unly readout password in case of forgetting password. In the other
cascj do not do it.
The meihod of PASSWORD MAJMAGEMENT including its lifting or reading out requires
to be controlled by system's own risk.
■ Readout the password;
I'he following example shows how' to readout the password .
Key operation Display example Description
Befor lurning
01
] power, орел the housing cover for
LCD display, and short-drcuil between TT-RST and
TT-G that is back of the operation panel with the
dip-type cable (refer to f igure
8
.
1
)
After that, turning on power, LCD back-light bright,
in the operation panel
10.00
m/s
100
.
0
%
Open the dip-type cable.
LCD displays "SIGNAL CHECKS and after that
displays measured daia,(measureTncni mode)
SET
□
PASSWORD I N P U T
m
Pressing [SET], password input mode and the cursor
appears.
^ ►
□ □
PASSWORD I N P U T
m
m
m
Change the value by pressing [ a J.and [ ► ].
SET
PASSWORD INPUT
123
Pressing [SET], the cursor disappears and the changed
display flickers. Pre.ss [SET] again to input the value.
SET
□
Al: EX. CLRR.
Whether input password agrees or dose not agree , the
items selection sequence, “Al: EX, CURR’' appears.
□ A4; PASSWORD Select A4: PASSWORD from among the configuration
items using [ ► j and [
a ] keys ,
SKI’
□
A4: PASSWORD
123
Press [SET] again to display the current
password(l23).
-
9 3
-