Toshiba LF494 - Manual (Page 144)

TOSHIBA
6 F 8 A 0 7 7 . 4
I I .1
15. Specifications
The flowmeter specification:s and Ihc type specification code used when ordering the
flowmeter are described in this chapter.
15*1 Flowmeter 5 pecifi cations
■ Overall Specifications
Measurement range m terms of flow velocity:
0-(J3 m/s to 0-10 in's (0-0.1 nvs to 0-0.3 nvs range is available optionally)
System accuracy: See the following table.
Table 15.1 System accuracy
Flow rate as a
percentage
of
range
Accuracy
O.l-LO m/s OJ -
1*0
m/s
1
*
0-10
m/s
0
to
20
% ±0.1% FS
20
to
100
% ±0.5% of rate
0 to 50% iO.25% of FS
50 to 100% ±0.5% of rate
Note: The accuracy above is measured under standard operating conditions at
Toshiba’s calibration facility.
Fluid conductivity: 5 ,«S/cm minimum
Fluid tempera! ure: -10 to -i-120 " C
Ambient temperature: -10 to H-fiO
° C
Dimensions and Mass; See Chapter 16, “Outline Dimensions,’'
- 1 43 -