Toshiba – Toshiba LF494 User Manual
Page 76
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

TOSHIBA
, 6 F 8 A 0 7 7 , 4
To change the preset count value
I’lic following exarnple shows how to change the preset count value from 500 to 1000,
Key Operation
Display example
Description
SLT
□
HI: PRESET
OQ000500
Press [SET] first to start the items selection
sequence and select HI: PRESET from amung the
configuration items using ( ► j and [ -
a
. ] keys.
Then press [SPri') again to display the preset count
value Í500 in this example).
►
□
HI: PRESET
00000500
Pressing [ ► J, the cursor appears. Then press [ ► ] as
many times as necessary to move the cursor to the
desired digit to be changed,
▲
□
HI: PRESET
00001500
0000100
G
Change the value by pressing 1
^ ].
Then move the
cursor to another digit by pressing [ ► ] and change the
value. In this example repeat this process until the
display shows
SET
□
HI: PRESET
0000100
G
Pressing ISET], the cursor disappears and the new
preset count value display flickers. Press [SET] again to
save the new preset count value.
SET
□
HI: PRESET
Pressing fSET], the system returns to the items
selection sequence.
-
75
-