6f8a0774, Notes, Toshiba – Toshiba LF494 User Manual
Page 88
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

TOSHIBA
6 F 8 A 0 7 7 4
I
To change the enable/disable of the fixed'value output and it$ output values:
The tblJowing example shows how to enable the fixed-valtic output function aitd to set Us
fixed current output to 20 mA DC.
Key operada n
Display exampie Description
SET
i
L1: FIXED 0UT
0FF
Press [SETj first to start the items selection sequence
and select LI: FIXED OUT from among the
conliguTation item.s using [ ► ] and [
a
] keys. TTien
press [SET] again to display the current fixed-output
eiiable/disable status (OFF in this example).
►
□
L1
:
FIXED 0UT
DFF
Pressing 1 ► 1» the cursor appears
▲
□
L1: F1XED 0UT
DN
Select “ON"’ by pressing [
a
].
SET
□
12:
FIX, CURR.
10. 0
ida
Pre.ssing [SET]j the selected status (ON) flickers. Press
[SET] again to save the status. Then the system goes lo
the fixed current value setting sequence*
►
□
12:
FIX, CURR.
tO. 0 nA
Move the cursor to the digit to be changed.
▲
□
L2: FIX. CURR.
20. 0 niA
Change the value lo
*‘2''
by pressing [
a
] twice,
[if necessary, move the cursor to another digit by
pressing 1 ► 1 and change the value.) (Note 1)
SET
□
L3: FIX. PULSE
IDO PPS
Pressing [SET], the cursor disappears and the changed
value display flickers. Press [SET] again to save the
value. Then the system goes to the fixed pulse output
setting sequence. (Note 2)
SET
□
L3: FIX, PULSE
100 PPS
Pressing [SK rjj the cursor disappears and the fixed
pulse output value flickers. Press [SET] again to save
[he value.
SET
□
L3: FIX. PULSE
Pressing [SET], the system returns to the item.s
selection sequence.
Notes:
1
. If you try lo set the fixed-value output above the aJJowable range^ an error message
^ H OVER SPEC appears. J’ry to set the value within the specified range.
2,
if PLl.SE OUT is not selected for digital output, the subsequent pulse output setting
sequence wiJl not be displayed.
-
87