6f8a0 7 7.4, Toshiba – Toshiba LF494 User Manual
Page 65
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

TOSHIBA
6 F 8 A 0 7 7.4.
I To chan{^e the damping constant:
The foil owing example shows how' ro change the damping consiani from 0.5 sec to 10 sec.
Key operation
Display example
Description
SET
□
D1: DAMPING
00. 5 s
Press [SEP) Urst to start the items selection se
quence and select Dl: DAMPING from among the
configuration items using [ ► ] and [
a
] keys,
Then press [SET] again to display the current
damping constant (0.5 S).
►
□
D1: DAMPING
OQ. 5 s
Pressing [ ► ], the cursor appears.
(If necessary, press ( ► | to move the cursor to the
digit to be changed,)
□
D1: DAMPING
10. 5 s
10,0 s
Change the value to “T" by pressing [
a
], Then move
the cursor to atioilicr digit by pressing [ ► ] and
change the value. In this example repeat this process
until the display shows '"10.0 s.'' (Note)
SET
□
01; DAMPING
10. 0 s
Pressing [SET], the cursor disappears and Ihe
changed display flickers. Press [SET] again to store
[his data.
SET
□
D1: DAMPING
Pressing [SET], the system returns to the items se
lection sequence.
-
64
-