Note, 8,2.17 passivord, Toshiba – Toshiba LF494 User Manual
Page 92
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

TOSHIBA
6 F 8 A 0 7 7 4
*Note
Only in Cities of the converter for special specificHtion (refer to 7.3,3 “Converter for
Special specificalions")^ read from R.2.17 io8,2.2il,
rhe normal converter dose not have these parameters, and these parameters do not appear
in the items selection sequence,
8,2.17 Passivord
The converter for special specifications have password that protects from calibrating and
changing pEirt of parameter that influences mepsoremenL
Proceed as follows to check or chEmge the password,
11 To check the password:
Key operation
Display eTtampk
Description
SET
□
A4: PA^SWORP
nz
Press [SET] first to start the items selection
sequence and select
A4x
PASSWORD from among the
configuration items using [ ► ] and [
a
. ] keys Then
press ¡SH'n again to display the current
password(123).
SET
□
A4: PASSWORD
Pressing [SET], the system returns to the items
selection sequence.
Note: In case of inputting wrong password in the password input mode
Key operation
Display example
Description
Press [SET] first to start the items seJcclion
SET
A4: PASSWORD
,scquence and scJcci A4: PASSWORD from among the
□
configuration items using [ ► ] and [
a
J keys Then
pre,ss [SET] again to display .
SET
A4: PASSWORD
Pressing [SET], the system returns to the items
□
selection sequence,
-
9 1
'