S2.6 damping; consitaiit, Toshiba – Toshiba LF494 User Manual
Page 64
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

TOSHIBA
6 F 8 A 0 7 7 4
S2.6
Damping; Consitaiit
The damping consiant is used to mcderiiie oulpul fluetuatjons. (fhe larger the damping
constant, (he more the output is dve^aged, Bui tJie response to an input change will be
slower,) The damping coitstant can be set as follows;
0.0 sec, 0.5 sec and I to 60 sec (in increinents of 1 second)
Note; 0.0 see setting will w'ork as equal to 0
,1
sec damping constant.
Setting value exceeding 60 sec will be automatically sei to 60 sec.
Proceed as follows to check or change the damping constant.
■ To check the damping constant:
Key operation
Display example
Description
SET
□
D1: DAMPING
02
.
0
s
Press [SliT] first to start the items selection se
quence and select Dl; DAMPING from among the
configuration items using [ ► ] and [
^
] keys.
Then press [SET] again to display the current
damping; constant.
SFT
j--------------------
D1: DAMPING
Pressing [SK'l'], the system reuirns to the items
selection .sequence.
-
63
-