Toshiba – Toshiba LF494 User Manual

Page 58

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

TOSHIBA

6 F 8 A 0 7 7 4

P) Unît ofsp^m

Onü of the following engineering units as a unit for the span can be selected. The unit is set

for the range I and the same unit applies automatically to other ranges—range 2, range 3

and range 4,

• Flow velocity:

m/s, (IVs)

• Flow rate:

mVs, mVmin, m^/h, mVd

Us, l/minj :/h, l/d

tnl/s, inly'niin» mUh, ml/d

(bbi/s), (bhl/min), (bbl/h), (ЬЫ/d)

(gal/s), (gal/min), (gal/h), (gal/d)

Units in parentheses, such as "‘bbl”, “gal’’ and ‘Tt” arc shown only when the meter si?:c is

selected in inches. They are not shown when the meter size is selected in mm.

If you change the unit, the new span based on the newly set unit will be automatically

displayed.

Only in case of the converter for special specification,s {refer to 7.3.3 “Converter for Special
specifications "), Time units /d> and flow' rate units bbl/s, bbl/jnin, bbl/h, bbl/d^ bbl can be
selected.

This manual is related to the following products:

LF404