Toshiba LF494 - Manual (Page 62)

TOSHIBA
6 F 8 A 0 7 7 4
To change the span (range):
The following example shows how to change the span of Range I from 2,0 m/s to 100 i/miii-
Key operation Display example Description
SET
□ C2: RANGE 1
02. QOO и/s
Press [SHTj first to start the items selection sequence
and seicct C
2
: ItWCE 1 from among the
configuration items using [ ► ] and [ a . ] keys. Then
press [SET) again to display the current span of Range
1
(
2.0
m/s in this example),
►
□ C2: RANGE 1
02
,
000
m/s
Pressing [ ► the cursor appears. Then press [ ► ]
as many times as necessary to move llie cursor to the
position for the measuring unit.
▲
□ CZ: RANGE 1
3, 93Ei-0 i/s
2. 36E+2 l/min
Select‘"i” as the first unit of the measuring unit by
pressing
1
as many times as necessary. (Motel)
Similarly, pressing [ ► ] to move the cursor to the
second unit (lime unit), select “min." (Note
2 )
(The displayed span automatically changes in
accordance with the newly selected unit.)
►
□
C2; RANGE 1
2. 36E+2 l/nin
Pre,ss [ ► 1 as many times as necessary to move the
cursor to Ihc digit of span to be dtanged.
□
C2: RANGE 1
L
3GE+Z J/tBin
TDOE+2 l/min
Change the value by pressing [ a . j. Then move the
cursor to another digit by preissing [ ► ] and change the
value. Ir\ this example repeat this process until the
display shows “t ,f>
0
K+
2
’"(=l
00
)
1
/m.
SH'l’
□ C2: RANGE 1
l.OOE+Z l/nin
Pressing [SET), the cursor disappears and the changed
display flickers. Press [SET] again to store the changed
span and unit.
SET
□ C2: RANGE 1
Pressing [SE'l’], the sysicm returns to the items selec­
tion sequence.
Notes 1» The first utiii of the measuring unit changes as shown below:
-> J -► ml-
(ft)
(ЬЫ^
Units in parentheses (bbl, ft and gal) are shown only when the meter size is seiccieci in
inches.
2. The second unit of the measuring unit changes as show n below-
Is ■ --------- ► /min ---------- *■ /h —-—► ,/d—I
How'ever, the following first and second unit combinations cannot be selected: in/mim
m/h, m/d, fl'miii, fi/h, f!/d.
- e '