Preset point output per form;) nee (2 j, Toshiba – Toshiba LF494 User Manual
Page 124
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

TOSHIBA
6 F 8 A 0 7 7 4
Preset point output per form;) nee (2 j
The following is jin example for preset point output (pulse out mode ) in which the totali
7
cr
is reset with an external ssignal (DI detective level is L).
Note: Only In case of Ihe converter for special specifications (refer to 7.3 J “Converter for
Special spectrications”)^ this preset point output (one shot pulse mode) can be selected.
H level input
L level inout
Preset point
ON
OFF
reset to zero
widih from the output goes ON
When the Rcsct/Starl signal is in t. level, the totalizer is reset to zero and stops counting.
When the Reset/Start signal goes to H level, the totalizer starts counting.
T he preset point output goes ON when the totalizer counts reaches the preset point,
The output goes OFF when the totalizer is reset to zero or when it takes the time setted
pulse width from the output goes ON,
“
1 2 3 -