Toshiba LF494 - Manual (Page 89)

TOSHIBA
6 F 8 A 0 7 7 4
To change the fixed pulse output value:
The
following example showii how' lo change the fixed pulse output value from 50 pps to
100
pps.
Key operation Dí,spla.v example Description
SET
□
L3t FIX. PULSE
050 PPS
Pret^s [SE1] first lo start Ibe itenvs selection sequence
and select L3: FIX. PULSE from among the
configuration items using [ ► ] and [ a ] keys. 'Fhen
press [SET] again to display the eurrent fixed pulse
output value (."iO pps in this example).
►
□ L3: FiX. PULSE
050 PPS
Pressing [ ► the cursor appears,
(if necessary, move the cursor hy pressing [ ► ] to the
digit to be changed.)
▲
□
L3: FIX, PULSE
150 PPS
100 PPS
Change the value to “1” by pressing [ a ]. Then move
the cursor to another digit to change and change the
value. Li this example repeat this process until the
display shows ‘*
1
(JU pps.”
SET
L3; FIX. PULSE
100 PPS
Pressing [SET], the cursor disappears and the changed
value display flickers. Press [SRT] again to save the
value.
SET
□
L3: FIX, PULSÉ
Pressing [SET], Ihe system returns to the items
selection sequence.
1
Fixed current output value can be changed by selecting the configuration item L2; FIX,
CURR.
- 83 '