BendixKing AV8OR Ace - Users Guide - Manual (Page 98)

Honeywell Bendix/King AV8OR Ace User’s Guide
Aviation Mode Operation D200904000003
Page 2-54 Rev 3 Mar 2012
© Honeywell International Inc. Do not copy without express permission of Honeywell
Figure 2-47: Map – Airport Filter
Double tap on the Minimum length selection to display a numeric
keypad to enter the minimum length. The
minimum runway length will be rounded to the nearest hundred feet.
Double tap on the surface selection to select the type of surface for
the airports you want to filter.
Any or Hard Only can be selected for the required runway surface.
Tap the DONE soft key to accept the changes.
Only airports that match the filter conditions will now show in the
Nearest Airports window.
When the user has selected (highlighted) the nearest point in the
desired destination list, the user taps the soft key. The system
sets a new course from the aircraft’s present position directly to the
desired nearest point’s position and shows the new Direct-To course
on the map.
Nearest VORs