BendixKing AV8OR Ace - Users Guide - Manual (Page 253)

Honeywell Bendix/King AV8OR Ace User’s Guide
D200904000003 Aviation Mode Operation
Rev 3 Mar 2012 Page 2-209
© Honeywell International Inc. Do not copy without express permission of Honeywell
CAUTION
The NMEA sentences supplied by AV8OR ACE may not be the
correct sentences for the all equipment that can receive
NMEA sentences.
Even though NMEA outputs are intended for use with
experimental aircraft only, Bendix King is not responsible for
the correct operation of equipment that receives the NMEA
output from AV8OR.
The NMEA Output Setup page permits the NMEA setup options to
be configured, as shown in the figure below.
Figure 2-210: NMEA Output Setup Page
When using the NMEA output to talk to another device, refer to the
user guide for the device for the correct NMEA setup.
Tap the SAVE & EXIT soft key to save any changes.
Tap the RESET VALUES soft key to restore the values to their
factory initial settings.
Double tap on an option or tap once on an option to highlight it and
then tap on the
EDIT soft key to display a pop up window to show
the possible values that can be set. Double tap the highlighted value
or highlight the value and tap on the
SELECT soft key to change the
item’s values.