Wxworx xm weather receiver bluetooth setup, Wxworx xm weather receiver bluetooth setup -15, Figure 6-6: wxworx bluetooth receiver setup -15 – BendixKing AV8OR Ace - Users Guide User Manual
Page 409
Honeywell Bendix/King AV8OR Ace User’s Guide
D200904000003 Appendix
Rev 3 Mar 2012
Page 6-15
©
Honeywell International Inc. Do not copy without express permission of Honeywell
WxWorx XM Weather Receiver Bluetooth Setup
To configure the AV8OR ACE to receive weather data from the
Bluetooth version of the WxWorx XM Weather Receiver, perform the
following steps:
Setup the WxWorx receiver in the
Device and Port Setup
page as
follows:
1.
On the Main Menu page, tap the
soft key to start the
Aviation mode navigation program.
2.
From the Map page, tap on the
MAIN MENU
soft key to go to
the Aviation Main Menu.
3.
Tap the
soft key to open the System Setup Menu.
4.
Highlight the
Device Setup
option and tap the
SELECT
soft key
to show the
Device and Port Setup
page.
5.
Set the Weather
Port
to
BlueTooth.
NOTE:
The AV8OR can have up to 4 BlueTooth connections at
one time.
6.
Set the Weather
Type
to “
WxWorx
”. When finished the Device
and Port Setup page should look like the setup options shown in
the figure below.
Figure 6-6: WxWorx Bluetooth Receiver Setup
Establish a paired connection between the WxWorx XM receiver and
the AV8OR.as follows: