BendixKing AV8OR Ace - Users Guide - Manual (Page 238)

Honeywell Bendix/King AV8OR Ace User’s Guide
Aviation Mode Operation D200904000003
Page 2-194 Rev 3 Mar 2012
© Honeywell International Inc. Do not copy without express permission of Honeywell
DATA FIELD SETUP
This setup permits the user to arrange data windows along the left
edge of the display in any order as shown in the figure below. The
left edge allows up to 9 visible data windows.
Figure 2-195: Data Field Setup
How to configure the Data Field windows:
1. Tap and highlight the desired left data window to modify the data
field type.
NOTE: The corresponding window in the Select Data Field Type
table is also identified. The title of the selected active data
window is highlighted in white with black lettering, and the
data window is highlighted in shades of grey
.
2. Scroll the list of items up or down to select the desired new data
field type. The abbreviation of the selected data type will be
displayed in the highlighted left data field window along with its
present value.
3. Tap and highlight the left data window, the new data window
configuration is completed.
4. Repeat 1 through 3 for each data field window to be changed.
5. 25 data field types are available to be selected as follows:
•
Not Shown