BendixKing AV8OR Ace - Users Guide - Manual (Page 229)

Honeywell Bendix/King AV8OR Ace User’s Guide
D200904000003 Aviation Mode Operation
Rev 3 Mar 2012 Page 2-185
© Honeywell International Inc. Do not copy without express permission of Honeywell
set the minimum length value. The available values are
specified in steps of 100 feet from 0 to 16,000 feet or in steps
of 50 meters from 0 to 4900 meters when the runway length
units are set to meters. By setting a minimum length, airports
with shorter runway lengths are not included in the search for
the closest airport. To disable this filter set the minimum
runway length to 00000 feet.
MAP SETUP
The initial Map Systems Setup Options page allows different
mapping options to be configured as shown in the figure below.
Figure 2-188: Map System Setup Options
There are five groups of features for each of the map layers. They
are: Common Features, Point Features, Line Features, Airspace and
Overlay. Each shows in a tab across the top.
•
Tap the SAVE & EXIT soft key to save any changes and go
back to the previous menu.
•
Tap the EDIT soft key to edit the data for the tabbed screen on
top.
•
Tap the RESET VALUES soft key to set all options to their
factory initial settings except Minimum Elevation when it is
currently set to a valid value.
Tap on the Common tab to select the Common features that show
below: