Direct-to navigation, Create a direct-to course from the map, Direct-to navigation -59 – BendixKing AV8OR Ace - Users Guide User Manual
Page 103: Create a direct-to course from the map -59, Figure 2-52: turn anticipation -59
Honeywell Bendix/King AV8OR Ace User’s Guide
D200904000003
Aviation Mode Operation
Rev 3 Mar 2012
Page 2-59
©
Honeywell International Inc. Do not copy without express permission of Honeywell
Figure 2-52: Turn Anticipation
The required bank angle to follow the arc will normally be between 3°
and 25° depending on the aircraft speed and the amount of course
change.
DIRECT-TO NAVIGATION
Direct-To Navigation lets the user set a course line from his current
position to any other position. Direct-To Navigation can be done with
the methods that follow:
•
Create a Direct-To course from the Map.
•
Create a Direct-To course from the keyboard entry.
•
Re-center the aircraft when Direct-To is already enabled
•
Bypass a WPT with a flight plan active
•
Enter a new WPT with a flight plan active.
Create a Direct-To course from the Map
Pan and zoom in/out on the map to find any point you want to set a
course to. If you tap on an existing NAVAID, more detail information
about the NAVAID point is shown by tapping the
MORE INFO
soft