BendixKing AV8OR Ace - Users Guide - Manual (Page 234)

Honeywell Bendix/King AV8OR Ace User’s Guide
Aviation Mode Operation D200904000003
Page 2-190 Rev 3 Mar 2012
© Honeywell International Inc. Do not copy without express permission of Honeywell
To change values, double tap the highlighted value item or tap once
on the item to highlight it and then tap on the
Edit soft key and a pop
up window shows the possible values that can be set. Highlight the
desired value and double tap it or tap the
Select soft key to finish the
change. Tap the SAVE & EXIT soft key to return to the previous
menu.
NAVIGATION SETUP
The Navigation Setup page permits the navigation setup options to
be configured, as shown in the figure below.
.
Figure 2-194: Navigation Setup
Tap the SAVE & EXIT soft key to save any changes. Tap the
RESET VALUES soft key to restore most of the values to their
factory initial settings.
Double tap on an option or tap once on an option to highlight it and
then tap on the
EDIT soft key to display a pop up window to show
the possible values that can be set. Double tap the highlighted value
or highlight the value and tap on the
SELECT soft key to change the
item’s values.
•
AutoNav: Enable the AutoNav function to allow AV8OR ACE to
automatically switch between the external and internal GPS
sources when there is more than one source. The AutoNav