Route planning options, Route planning options -105 – BendixKing AV8OR Ace - Users Guide User Manual
Page 363

Honeywell Bendix/King AV8OR Ace User’s Guide
D200904000003
Automotive Mode Operation
Rev 3 Mar 2012
Page 3-105
©
Honeywell International Inc. Do not copy without express permission of Honeywell
Soft Key
Description
Master Volume
Use the switch to mute all sounds of the
device and then to re-enable them again. The
position of the fader determines the volume
level. The loudness of
GoDrive
is
independent of your device settings. When
you exit the program, the device default
settings return.
Voice Guidance
Volume
The slider adjusts the loudness of voice
prompts. In its leftmost position, the voice
guidance is suppressed; in its rightmost
position, the master volume applies.
Key Sounds
Key sounds are audible confirmation of either
pressing hardware soft Keys or tapping the
touch screen. The switch turns the key
sounds on or off. Key sounds are played at
the master volume level.
Dynamic Volume
When driving at high speed, the noise in the
car may be too loud to clearly hear the voice
guidance and other sounds. Using Dynamic
Volume you can instruct
GoDrive
to increase
the volume when your speed exceeds a
certain minimum, and reach its highest
volume at the given maximum speed.
Route Planning Options
These settings determine how routes will be calculated. Tap the
following soft Keys:
,
,
.
Soft Key
Description
Vehicle
You can set the type of vehicle you will use to
navigate the route. Based upon this setting,
some of the road types will be excluded from
the route (e.g. motorways for pedestrians), or
some of the restrictions may not be taken into
account (e.g. emergency vehicles have only a
few restrictions).