BendixKing AV8OR Ace - Quick Reference Guide - Manual

AV8OR ACE
TM
Quick Reference Guide
1. SD CARD Slot – Make sure the correct SD card is
inserted into the SD CARD Slot.
2. VOLUME – Rotate the VOLUME knob counter-
clockwise to increase the volume and clockwise to
decrease the volume.
3. POWER – Press and hold the POWER button for
two seconds to turn on. Hold POWER button for
one second to put in Sleep Mode. Hold POWER
button for three seconds to turn off.
Note: Sleep Mode will drain the battery.
4.
RESET – Press the RESET button on the back of
the case to reboot the system.
5. ZOOM IN/ZOOM OUT – Press the “+” or “–“ side of
the ZOOM IN/ZOOM OUT hard key to enlarge or
decrease the current view on the screen.
6. DIRECT TO – Press the DIRECT TO hard key to
create a course to the selected destination.
7. VIEW – Press the VIEW hard key to change the
screen to predefined views or pages.
8. MENU – Press the MENU hard key at any time to
return to the Main Menu page.
MAIN MENU
1. Tap the Portrait/Landscape icon to switch between
Portrait and Landscape modes for GO fly program.
2. Tap the GO fly soft key for Aviation mode
3. Tap the GO drive soft key for Automotive Mode.
4. Tap on the Settings soft key to view the GPS
Status, adjust the Backlight, view the System Info,
and adjust the Bluetooth settings or to go into
Initial Setup mode. Refer to the user guide to
configure the initial setup options.
5. Tap the Multimedia soft key to listen to music, view
a movie, look at photos or view an E-Book.
Note: Setting power save modes or the backlight to
dimmer values will increase battery life.
AVIATION MAP PAGE
1 Data Windows (User Configurable)
2 Arrow always points to North (Double
tap selects North Up or Track Up)
3 Main Map Window
4 Aircraft Symbol
5 Soft Keys
6 Fast Page Access Area
7 Title Window
8 Current Range Window
9 Status Window
10 Smart Profile Window (On/Off)
Basic Usage
Touch and drag finger or stylus on the screen to move
the map. Tap on an item on the map to bring up the
MORE INFO soft key for additional information about the
item. Tap on the soft keys (5) to navigate through the
menus.
Note: Certain aviation application lists can be scrolled by
“dragging” the menu list.
MAP PAGE TIPS
Changing the Map View
1. Tap the VIEWS hard key to toggle different views.
Smart Profile View
1. Tap the MAP VIEW soft key.
2. Tap the VERT PROFILE soft key to turn the vertical
profile on or off.
3. Tap the SAVE & EXIT soft key.
Changing the Map Orientation
1. Double tap the North pointer arrow (2) to change
between North Up and Track Up mode.
Changing the Map Options
1. Tap the MAP VIEW soft key.
2. Tap the MAP SETUP soft key.
3. On the Map System Setup pages, highlight the
data field and tap EDIT soft key to view options.
4. Highlight the option and tap SELECT soft key.
5. Tap the SAVE & EXIT soft key when finished.
Changing the Data Windows
1. From the MAP page, tap the MAIN MENU soft key,
and then tap the SETTINGS soft key.
2. Highlight the Data Field Setup option and then tap
the SELECT soft key.
3. Tap the Data Field location on the left side you wish
to change.(9 spots are available to use).
4. Tap on a field in the Select Data Field Type list to
move it to the spot you selected in step 3. Tap the
SAVE & EXIT soft key to save changes.
Finding the Nearest Location
1. Tap the NEAREST soft key to show the Nearest
Database Selection page.
2. Tap one of the Nearest categories and then tap the
SELECT soft key to show the locations.
3. Highlight the selected location and tap the MORE
INFO softkey or tap the D-> hard key to create a
course from your present location.
MAP PAGE - DIRECT TO
Create a Direct To Course from Map
1. Tap on the desired destination on the map. For
multiple options, select the destination from the list.
2. Press the D-> hard key to create a Direct To course
from your present location.
Create a Direct To Course with Keyboard
1. Press the D-> hard key.
2. Use the virtual keyboard to enter the Airport
Identifier, Name or Location.
3. Tap the Enter soft key when finished to show
details of the waypoint selected.
4. Tap the OK soft key to create a Direct To course
from your present location.
Recenter Aircraft when Direct To Enabled
1. Press the D-> hard key to show the keyboard with
the current Direct To location already entered.
2. Tap the Enter soft key to create a new Direct To
course from your present location.
Bypass Waypoint with Flight Plan Active
1. Tap the D-> hard key to show the active flight plan.
2. Highlight the new Direct To waypoint (Wpt).
3. Tap D-> hard key to make the selected Wpt the
next Wpt in the flight plan. When Wpt is reached,
the flight plan sequences to the next Wpt in the
flight plan.
Enter New Waypoint - Flight Plan Active
1. Tap the D-> hard key to show the active flight plan.
2. Tap the KEYBD ENTRY soft key to enter the new
Direct To Wpt using the virtual keyboard.
3. Selecting Enter suspends the active flight plan and
enables the Direct To function.
Bendix King by Honeywell Page 3
AV8OR ACE Quick Reference Guide Bendix King by Honeywell Page 2
AV8OR ACE Quick Reference Guide Bendix King by Honeywell Page 1
AV8OR ACE Quick Reference Guide Bendix King by Honeywell Page 4
AV8OR ACE Quick Reference Guide Bendix King by Honeywell Page 5
AV8OR ACE Quick Reference Guide