BendixKing AV8OR Ace - Users Guide - Manual (Page 364)

Honeywell Bendix/King AV8OR Ace User’s Guide
Automotive Mode Operation D200904000003
Page 3-106 Rev 3 Mar 2012
© Honeywell International Inc. Do not copy without express permission of Honeywell
Soft Key Description
Road Types Used
for Route Planning To let the route fit your needs, you can also
set which road types are to be considered for
or to be excluded from the route, if possible.
Excluding a route is a preference. It does not
necessarily mean total prohibition. If your
destination can only be accessed using some
of the excluded road types, they will be used,
but only as much as necessary. In this case a
warning icon will be shown on the Route
Information screen, and the part of the route
not matching your preference will be
displayed in a different color on the map.
Route Calculation
Method You can choose from different route types.
The routing method can also be chosen while
creating the route: when the destination is
selected, tap in the
Cursor menu.
Use Traffic
Information When TMC messages are received, this
setting tells
GoDrive whether to use that
information in route planning.
Recalculate to
Avoid Traffic This setting determines how GoDrive uses
the received TMC information in route
recalculation: • Automatic: When route
recalculation becomes necessary based on
the received TMC events,
GoDrive
recalculates the route automatically. • Manual:
When route recalculation becomes necessary
based on the received TMC events,
GoDrive
notifies you, but you can decide whether to
recalculate the route or not. • Disabled: TMC
events are only taken account when the route
is recalculated in an off-route situation.
Vehicle Types:
•
Car
•
Taxi
•
Bus