BendixKing AV8OR Ace - Users Guide - Manual (Page 48)

Honeywell Bendix/King AV8OR Ace User’s Guide
Aviation Mode Operation D200904000003
Page 2-4 Rev 3 Mar 2012
© Honeywell International Inc. Do not copy without express permission of Honeywell
For additional information on the present software and database
versions, please go to the System Setup page and tap on the
Status
Page soft key to bring up the System Status Menu. Highlight the
Software and Database Versions and tap the Select soft key to
show the present software and database versions.
The user can browse the Bendix/King web page at
bendixking.com/av8or to see if a newer version of the software or
database is available.
If the OK soft key is pushed to acknowledge the Jeppesen
database, the Aviation Map page is displayed.
If the DEMO MODE soft key is tapped, then AV8OR ACE will enter a
simulation mode.
Demo Mode
Demo Mode lets the user become familiar with handling the
AV8OR ACE system on the ground by running in a simulation
mode. When the AV8OR ACE is in Demo Mode, it performs the
same as when it is receiving valid sensor signals to use the
various functions. Demo Mode can only be activated on the final
title page during startup, as shown in the figure below.
After tapping the DEMO MODE soft key, the simulator shows a
caution page which must be acknowledged before continuing, as
shown in the figure below.