BendixKing AV8OR Ace - Users Guide - Manual (Page 215)

Honeywell Bendix/King AV8OR Ace User’s Guide
D200904000003 Aviation Mode Operation
Rev 3 Mar 2012 Page 2-171
© Honeywell International Inc. Do not copy without express permission of Honeywell
Tap the SKIP CHECK soft key to skip to the next check box.
Tap the CHANGE NOTEPAD soft key to change to a different
checklist.
Wind Vector Calculator Page
Tap on the WIND CALC soft key on the Message page to display
the Wind Vector Calculation Page as shown in the figure below.
Figure 2-175: Wind Vector Calculation Page
This page allows the user to enter the following parameters: Ground
Speed, Magnetic Heading, Desired Track (DTK), Calibrated Air
Speed (CAS), Outside Air Temperature (OAT) and Indicated
Altitude. After these parameters are entered, the unit calculates
Wind Speed / Angle and True Air Speed (TAS). If the Wind data
window is selected, the Wind Speed and Direction are displayed in
the window.
The Ground Speed, Track and Indicated Altitude parameters are
automatically entered by the program.
Enter the Magnetic Heading, Calibrated Air Speed and Outside Air
Temperature to enable the Wind calculation function to calculate the
winds speed/angle and True Air Speed. Double tap on each field or
tap on each field to highlight it and tap the
EDIT soft key to display a
numeric entry keypad as shown in the figure below.