Welch Allyn 20хEL Propaq Encore Vital Signs Monitor - Reference Guide - Manual (Page 128)

Printer Maintenance
Welch Allyn 128 Propaq Encore Reference Guide
Printer Paper Removal
Printer Maintenance
Loading Paper
Paper is loaded through the bottom of the printer.
1. Lay the monitor on its back to gain access to the bottom of the printer.
2. Squeeze the locks on the paper door toward each other and pull the door toward you
to open it.
3. Lift the paper roll from the holder and pull out any paper remaining in the printing
mechanism.
4. Place the new paper roll onto the holder, as shown below, and pull out several inches
of paper.
Caution If a Propaq Encore has a battery installed or ac power connected
and is stored for an extended period without use, the printer paper can cause
damage to the printhead. Before storing a Propaq Encore for more than two
months without use, remove the roll of printer paper.
Caution Use only low-debris printer paper purchased from or recommended
by Welch Allyn. Use of other paper can cause unclear printing of patient data,
damage to printing head, and eventual printer failure. Store all paper
(including a monitor loaded with paper) in an environment that meets the
paper storage specifications listed in Appendix B. Failure to properly store
paper can result in paper discoloration and damage to the printer.