Welch Allyn 20хEL Propaq Encore Vital Signs Monitor - Reference Guide - Manual (Page 111)

Printing Patient Data
Propaq Encore Reference Guide 111 Welch Allyn
Printing When a Patient Alarm Occurs
To set up the printer to print on a patient alarm, follow these steps.
1. From the Main Menu, press the following buttons:
SETUP
,
MORE
,
PRINTER
.
2. Press the NEXT button to select ALARM PRINT in the printer setup window.
3. Press the CHANGE button until ALARM PRINT is set to ON.
SETUP PAGE
mmHg
NEXT PREV MENU PR TREND MORE CHANGE
MCO 2 BR
SpO 2
PA
PRINTER
CONTINUOUS : 25.0 mm/s
AUTO PRINT : 15 minutes
ALARM PRINT :
OFF
NIBP TICKET : OFF
APNEA TICKET : OFF
OXYCRG ON ALARM: OFF
35/ 18
( 85)
35 12
92
A 3-second mark Printout continues
Alarm occurred here Alarming vital sign
numerics are highlighted