Welch Allyn 20хEL Propaq Encore Vital Signs Monitor - Reference Guide - Manual (Page 113)

Printing Trends
Propaq Encore Reference Guide 113 Welch Allyn
Printing Trends
Printed trends are useful for reviewing the patient's vital signs over the last several minutes
to the last five hours. The Propaq enables you to print one trend or several trends with a
press of a button, or automatically at 4-hour intervals.
Printing a Single Trend
The best way to print just one trend is with the
PRINT
button in the Trends Menu. When you
press the
PRINT
button, the displayed trend is printed. If you want to print a trend different
from the one displayed, press
NXT TRND
until the desired trend is shown.
Printing Several Trends
The best way to print several trends at one time is to set up the printer to print the trends you
want and then press the
PRINT TRENDS
button on the expansion module, or the
PR TREND
button
in the Printer Menu, whenever you want the trends printed.
1. From the Main Menu, press
SETUP
,
MORE
,
PRINTER
,
MORE
. The printer trend select
window appears.
2. Using the
NEXT
and
CHANGE
buttons, select each of the trends you want printed and
turn them on. Turn off all other trends.
3. Now, each time you want to print the selected trends, press
PRINT TRENDS
.
This symbol indicates that the NIBP
reading was taken in the presence of
high motion artifact while monitoring
ECG. Artifact can affect accuracy. To
help reduce artifact, see page 59.