Kontron AT8402 CLI - Manual (Page 97)

AT8402 Switching Commands
Page 2 - 65 AT8402 CLI Reference Manual
Fast Leave Mode Indicates whether IGMP Snooping Fast-leave is active on the
interface.
Group Membership Interval The amount of time in seconds that a switch will wait
for a report from a particular group on a particular interface before
deleting the interface from the entry.This value may be configured
Maximum Response Time The amount of time the switch waits after it sends a query
on an interface because it did not receive a report for a particular group
on that interface. This value may be configured.
Multicast Router Expiry Time The amount of time to wait before removing an inter-
face from the list of interfaces with multicast routers attached. The
interface is removed if a query is not received. This value may be con-
figured.
When you specify a value for , the following information appears:
VLAN ID The VLAN ID.
IGMP Snooping Admin Mode Indicates whether IGMP Snooping is active on the
VLAN.
Fast Leave Mode ndicates whether IGMP Snooping Fast-leave is active on the
VLAN.
Group Membership Interval The amount of time in seconds that a switch will wait
for a report from a particular group on a particular interface, which is
participating in the VLAN, before deleting the interface from the
entry.This value may be configured.
Maximum Response Time The amount of time the switch waits after it sends a query
on an interface, participating in the VLAN, because it did not receive a
report for a particular group on that interface. This value may be con-
figured.
Multicast Router Expiry Time The amount of time to wait before removing an inter-
face that is participating in the VLAN from the list of interfaces with
multicast routers attached. The interface is removed if a query is not
received. This value may be configured.
2.15.10 show igmpsnooping mrouter interface
This command displays information about statically configured ports.
Format
show igmpsnooping mrouter interface
<slot/port>
Mode Privileged EXEC
Interface The port on which multicast router information is being displayed.
Multicast Router Attached Indicates whether multicast router is statically enabled
on the interface.
VLAN ID The list of VLANs of which the interface is a member.
2.15.11 show igmpsnooping mrouter vlan
This command displays information about statically configured ports.