11 pre-login banner and system prompt commands, 1 copy (pre-login banner), 2 set prompt – Kontron AT8402 CLI User Manual
Page 223: 12 watchdog support commands, 1 set watchdog, 12 watchdog support commands - 33, 1 set watchdog - 33, At8402 management commands

AT8402
Management Commands
Page 5 - 33
AT8402 CLI Reference Manual
used as a tool for script development. Validation identifies potential problems. It might
not identify all problems with a given script on any given device.
Format
script validate
Mode
Privileged EXEC
5.11
Pre-login Banner and System Prompt Commands
This section describes the commands you use to configure the pre-login banner and the
system prompt. The pre-login banner is the text that displays before you login at the
User:
prompt.
5.11.1
copy (pre-login banner)
The
copy
command includes the option to upload or download the CLI Banner to or
from the switch. You can specify local URLs by using TFTP, Xmodem, Ymodem, or
Zmodem.
Default
none
Format
copy
nvram:clibanner
copy nvram:clibanner
Mode
Privileged EXEC
5.11.2
set prompt
This command changes the name of the prompt. The length of name may be up to 64
alphanumeric characters.
Format
set prompt
Mode
Privileged EXEC
5.12
Watchdog Support Commands
The IPMC based hardware watchdog supervises board operation. There are 4 distinct
stages in the lifecycle of the system where different watchdog timers and actions are
used.
All watchdog parameters are stored in the bootloader environment. All times are in
seconds. All watchdog events will power cycle the board when the watchdog expires.
•
BIST watchdog during BIST
•
OS loader watchdog during loading of kernel and INITRD
•
Application Startup watchdog during startup of switching application
•
Application Running watchdog during normal execution of switching application
5.12.1
set watchdog
This command configures the watchdog. It sets the timeout for different watchdog
(during BIST, during loading of kernel and INITRD, during startup of switching
application and during normal execution of switching application) and the heartbeat
(sending interval and number of missed heartbeats before failure occurance). All
values (except missed heartbeats) are in seconds, a value “0” means that the related
watchdog is disabled.