15 show lldp local-device, 16 show lldp local-device detail, 18 denial of service commands – Kontron AT8402 CLI User Manual
Page 106: 18 denial of service commands - 74, Switching commands at8402
Switching Commands
AT8402
AT8402 CLI Reference Manual
Page 2 - 74
Management Address For each interface on the remote device with an LLDP agent,
lists the type of address the remote LLDP agent uses and specifies the
address used to obtain information related to the device.
Time To Live The amount of time (in seconds) the remote device's information
received in the LLDPDU should be treated as valid information.
2.17.15
show lldp local-device
Use this command to display summary information about the advertised LLDP local
data. This command can display summary information or detail for each interface.
Format
show lldp local-device
{<slot/port> | all}
Mode
Privileged EXEC
Interface
The interface in a slot/port format.
Port ID
The port ID associated with this interface.
Port Description The port description associated with the interface.
2.17.16
show lldp local-device detail
Use this command to display detailed information about the LLDP data a specific
interface transmits.
Format
show lldp local-device detail
<slot/port>
Mode
Privileged EXEC
Interface
The interface that sends the LLDPDU.
Chassis ID Subtype The type of identification used in the Chassis ID field.
Chassis ID
The chassis of the local device.
Port ID Subtype The type of port on the local device.
Port ID
The port number that transmitted the LLDPDU.
System Name The system name of the local device.
System Description Describes the local system by identifying the system name and
versions of hardware, operating system, and networking software sup-
ported in the device.
Port Description Describes the port in an alpha-numeric format.
System Capabilities Supported Indicates the primary function(s) of the device.
System Capabilities Enabled Shows which of the supported system capabilities are
enabled.
Management Address The type of address and the specific address the local LLDP
agent uses to send and receive information.
2.18
Denial of Service Commands
This section describes the commands you use to configure DoS Control. FASTPATH
software provides support for classifying and blocking specific types of Denial of