Kontron AT8402 CLI - Manual (Page 28)

Using the Command-Line Interface AT8402
AT8402 CLI Reference Manual Page 1 - 6
Table 4.6 explains how to enter or exit each mode.
Line Config Switch (line)# Allows you to configure
various telnet settings
and the console interface.
Policy Map
Config Switch (Config-policy-map)# Allows you to access the
QoS Policy-Map config-
uration mode to config-
ure the QoS Policy-Map.
Policy Class
Config Switch (Config-policy-class-
map)# Consists of class cre-
ation, deletion, and
matching commands.
The class match com-
mands specify Layer 2,
Layer 3, and general
match criteria.
Class Map Con-
fig Switch (Config-class-map)# Allows you to access the
QoS Class-Map configu-
ration mode to configure
QoS class maps.
MAC Access-list
Config Switch (Config-mac-access-list)# Allows you to create a
MAC Access-List and to
enter the mode contain-
ing Mac Access-List
configuration com-
mands.
TACACS Config Switch (Tacacs)# Allows you to configure
properties for the
TACACS servers.
DHCP Pool
Config Switch (Config dhcp-pool)# Allows you to access the
DHCP Pool configura-
tion.
Table 4.6. CLI Mode Access and Exit
Command
Mode
Access Method
Exit or Access Previous
Mode
User EXEC This is the first level of access. To exit, enter logout .
Privileged EXEC From the User EXEC mode, enter
enable .
To exit to the User EXEC
mode, enter
exit or press
Ctrl-Z .
Global Config From the Privileged EXEC mode, enter
configure .
To exit to the Privileged
EXEC mode, enter
exit , or
press Ctrl-Z .
VLAN Config From the Privileged EXEC mode, enter
vlan database .
To exit to the Privileged
EXEC mode, enter
exit , or
press Ctrl-Z .
Table 4.5. CLI Command Modes
Command
Mode
Prompt Mode Description