2 macfilter addsrc, 3 macfilter addsrc all, 4 show mac-address-table static – Kontron AT8402 CLI User Manual
Page 91: At8402 switching commands
AT8402
Switching Commands
Page 2 - 59
AT8402 CLI Reference Manual
2.14.2
macfilter addsrc
This command adds the interface to the source filter set for the MAC filter with the
MAC address of
be specified as a 6-byte hexadecimal number in the format of b1:b2:b3:b4:b5:b6. The
parameter must identify a valid VLAN.
Format
macfilter addsrc
Mode
Interface Config
2.14.2.1
no macfilter addsrc
This command removes a port from the source filter set for the MAC filter with the
MAC address of
and VLAN of
. The
must be specified as a 6-byte hexadecimal number in the format of b1:b2:b3:b4:b5:b6.
The
parameter must identify a valid VLAN.
Format
no macfilter addsrc
Mode
Interface Config
2.14.3
macfilter addsrc all
This command adds all interfaces to the source filter set for the MAC filter with the
MAC address of
and
. You must specify the
parameter as a 6-byte hexadecimal number in the format of b1:b2:b3:b4:b5:b6. The
parameter must identify a valid VLAN.
Format
macfilter addsrc all
Mode
Global Config
2.14.3.1
no macfilter addsrc all
This command removes all interfaces to the source filter set for the MAC filter with the
MAC address of
and VLAN of
. You must specify the
parameter as a 6-byte hexadecimal number in the format of b1:b2:b3:b4:b5:b6.
The
parameter must identify a valid VLAN.
Format
no macfilter addsrc all
Mode
Global Config
2.14.4
show mac-address-table static
This command displays the Static MAC Filtering information for all Static MAC
Filters. If you select
, all the Static MAC Filters in the system are displayed. If
you supply a value for
you must also enter a value for
, and the
system displays Static MAC Filter information only for that MAC address and VLAN.
Format
show mac-address-table static
{
Mode
Privileged EXEC
MAC Address The MAC Address of the static MAC filter entry.
VLAN ID
The VLAN ID of the static MAC filter entry.