Kontron AT8402 CLI - Manual (Page 139)

AT8402 Quality of Service (QoS) Commands
Page 3 - 27 AT8402 CLI Reference Manual
3.8.5 show access-lists
This command displays IP ACLs and MAC access control lists information for a
designated interface and direction.
Format
show access-lists interface <slot/port> in
Mode Privileged EXEC
ACL Type Type of access list (IP or MAC).
ACL ID Access List name for a MAC access list or the numeric identifier for
an IP access list.
Sequence Number An optional sequence number may be specified to indicate the
order of this access list relative to other access lists already assigned to
this interface and direction. A lower number indicates higher prece-
dence order. If a sequence number is already in use for this interface
and direction, the specified access list replaces the currently attached
access list using that sequence number. If the sequence number is not
specified by the user, a sequence number that is one greater than the
highest sequence number currently in use for this interface and direc-
tion is used. Valid range is (1 to 4294967295).