Kontron AT8402 CLI - Manual (Page 110)

Switching Commands AT8402
AT8402 CLI Reference Manual Page 2 - 78
2.19.1 bridge aging-time
This command configures the forwarding database address aging timeout in seconds.
The
parameter must be within the range of 10 to 1,000,000 seconds.
Default 300
Format bridge aging-time <10-1,000,000>
Mode Global Config
2.19.1.1 no bridge aging-time
This command sets the forwarding database address aging timeout to the default value.
Format
no bridge aging-time
Mode Global Config
2.19.2 show forwardingdb agetime
This command displays the timeout for address aging. In an IVL system, the [fdbid |
all] parameter is required.
Default all
Format show forwardingdb agetime [fdbid | all]
Mode Privileged EXEC
Forwarding DB ID Fdbid (Forwarding database ID) indicates the forwarding data-
base whose aging timeout is to be shown. The all option is used to dis-
play the aging timeouts associated with all forwarding databases. This
field displays the forwarding database ID in an IVL system.
Agetime In an IVL system, this parameter displays the address aging timeout
for the associated forwarding database.
2.19.3 show mac-address-table multicast
This command displays the Multicast Forwarding Database (MFDB) information. If
you enter the command with no parameter, the entire table is displayed. You can
display the table entry for one MAC Address by specifying the MAC address as an
optional parameter.
Format
show mac-address-table multicast
Mode Privileged EXEC
MAC Address A multicast MAC address for which the switch has forwarding and or
filtering information. The format is two-digit hexadecimal numbers
separated by colons, for example 01:23:45:67:89:AB. In an IVL sys-
tem the MAC address will be displayed as a MAC address and VLAN
ID combination of 8 bytes.
Type The type of the entry. Static entries are those that are configured by the
end user. Dynamic entries are added to the table as a result of a learn-
ing process or protocol.