Kontron AT8402 CLI - Manual (Page 103)

AT8402 Switching Commands
Page 2 - 71 AT8402 CLI Reference Manual
Format
lldp notification
Mode Interface Config
2.17.6.1 no lldp notification
Use this command to disable notifications.
Default disabled
Format no lldp notification
Mode Interface Config
2.17.7 lldp notification-interval
Use this command to configure how frequently the system sends remote data change
notifications. The
parameter is the number of seconds to wait between
sending notifications. The valid interval range is 5-3600 seconds.
Default 5
Format
lldp notification-interval
<interval>
Mode Global Config
2.17.7.1 no lldp notification-interval
Use this command to return the notification interval to the default value.
Format no lldp notification-interval
Mode Global Config
2.17.8 clear lldp statistics
Use this command to reset all LLDP statistics.
Format
clear lldp statistics
Mode Global Config
2.17.9 clear lldp remote-data
Use this command to delete all information from the LLDP remote data table.
Format
clear lldp remote-data
Mode Global Config
2.17.10 show lldp
Use this command to display a summary of the current LLDP configuration.
Format show lldp
Mode Privileged EXEC
Transmit Interval How frequently the system transmits local data LLDPDUs, in sec-
onds.