Kontron AT8402 CLI - Manual (Page 130)

Quality of Service (QoS) Commands AT8402
AT8402 CLI Reference Manual Page 3 - 18
If the Policy Name is specified the following fields are displayed:
Policy Name The name of this policy.
Type
The policy type (Only inbound policy definitions are supported for
this platform.)
The following information is repeated for each class associated with this policy (only
those policy attributes actually configured are displayed):
Assign Queue Directs traffic stream to the specified QoS queue. This allows a traffic
classifier to specify which one of the supported hardware queues are
used for handling packets belonging to the class.
Class Name The name of this class.
Committed Burst Size (KB) The committed burst size, used in simple policing.
Committed Rate (Kbps) The committed rate, used in simple policing,
Conform Action The current setting for the action taken on a packet considered to
conform to the policing parameters. This is not displayed if policing is
not in use for the class under this policy.
Conform COS The CoS mark value if the conform action is set-cos-transmit.
Conform DSCP Value The DSCP mark value if the conform action is set-dscp-trans-
mit.
Conform IP Precedence Value The IP Precedence mark value if the conform action
is set-prec-transmit.
Drop Drop a packet upon arrival. This is useful for emulating access control
list operation using DiffServ, especially when DiffServ and ACL can-
not co-exist on the same interface.
Mark CoS The class of service value that is set in the 802.1p header of inbound
packets. This is not displayed if the mark cos was not specified.
Mark IP DSCP The mark/re-mark value used as the DSCP for traffic matching this
class. This is not displayed if mark ip description is not specified.
Mark IP Precedence The mark/re-mark value used as the IP Precedence for traffic
matching this class. This is not displayed if mark ip precedence is not
specified.
Non-Conform Action The current setting for the action taken on a packet considered
to not conform to the policing parameters. This is not displayed if
policing not in use for the class under this policy.
Non-Conform COS The CoS mark value if the non-conform action is set-cos-trans-
mit.
Non-Conform DSCP Value The DSCP mark value if the non-conform action is set-
dscp-transmit.
Non-Conform IP Precedence Value The IP Precedence mark value if the non-con-
form action is set-prec-transmit.
Policing Style The style of policing, if any, used (simple).