Kontron AT8402 CLI - Manual (Page 171)

AT8402 Utility Commands
Page 4 - 31 AT8402 CLI Reference Manual
Last Update Time Time of last clock update.
Last Attempt Time Time of last transmit query (in unicast mode).
Last Attempt Status Status of the last SNTP request (in unicast mode) or unsolicited
message (in broadcast mode).
Broadcast Count Current number of unsolicited broadcast messages that have been
received and processed by the SNTP client since last reboot.
Multicast Count Current number of unsolicited multicast messages that have been
received and processed by the SNTP client since last reboot
4.7.10 show sntp client
This command is used to display SNTP client settings.
Format
show sntp client
Mode Privileged EXEC
Client Supported Modes Supported SNTP Modes (Broadcast, Unicast, or Multicast).
SNTP Version The highest SNTP version the client supports
Port
SNTP Client Port
Client Mode Configured SNTP Client Mode
4.7.11 show sntp server
This command is used to display SNTP server settings and configured servers.
Format show sntp server
Mode Privileged EXEC
Server IP Address IP address of configured SNTP Server
Server Type Address Type of Server.
Server Stratum Claimed stratum of the server for the last received valid packet.
Server Reference ID Reference clock identifier of the server for the last received
valid packet.
Server Mode SNTP Server mode.
Server Maximum Entries Total number of SNTP Servers allowed.
Server Current Entries Total number of SNTP configured.
For each configured server:
IP Address IP address of configured SNTP Server.
Address Type Address Type of configured SNTP server.
Priority
IP priority type of the configured server.
Version SNTP Version number of the server. The protocol version used to
query the server in unicast mode.
Port Server Port Number
Last Attempt Time Last server attempt time for the specified server.