Kontron AT8402 CLI - Manual (Page 75)

AT8402 Switching Commands
Page 2 - 43 AT8402 CLI Reference Manual
2.10.16 users login
This command assigns the specified authentication login list to the specified user for
system login. The
must be a configured and the must be
a configured login list.
If the user is assigned a login list that requires remote authentication, all access to the
interface from all CLI, web, and telnet sessions will be blocked until the authentication
is complete.
Note that the login list associated with the ‘admin’ user can not be changed to prevent
accidental lockout from the switch.
Format users login
Mode Global Config
2.10.17 show authentication
This command displays the ordered authentication methods for all authentication login
lists.
Format
show authentication
Mode Privileged EXEC
Authentication Login List The authentication login listname.
Method 1
The first method in the specified authentication login list, if any.
Method 2 The second method in the specified authentication login list, if any.
Method 3 The third method in the specified authentication login list, if any.
2.10.18 show authentication users
This command displays information about the users assigned to the specified
authentication login list. If the login is assigned to non-configured users, the user
“default” will appear in the user column.
Format
show authentication users
Mode Privileged EXEC
User The user assigned to the specified authentication login list.
Component The component (User or 802.1x) for which the authentication login list
is assigned.
2.10.19 show dot1x
This command is used to show a summary of the global dot1x configuration, summary
information of the dot1x configuration for a specified port or all ports, the detailed
dot1x configuration for a specified port and the dot1x statistics for a specified port -
depending on the tokens used.
Format show dot1x [{summary {< slot/port > | all} | detail < slot/port > |
statistics < slot/port >]
Mode Privileged EXEC