Kontron AT8402 CLI - Manual (Page 207)

AT8402 Management Commands
Page 5 - 17 AT8402 CLI Reference Manual
Default 0.0.0.0
Format
snmp-server community ipmask
Mode Global Config
5.6.4.1 no snmp-server community ipmask
This command sets a client IP mask for an SNMP community to 0.0.0.0. The name is
the applicable community name. The community name may be up to 16 alphanumeric
characters.
Format
no snmp-server community ipmask
Mode Global Config
5.6.5 snmp-server community mode
This command activates an SNMP community. If a community is enabled, an SNMP
manager associated with this community manages the switch according to its access
right. If the community is disabled, no SNMP requests using this community are
accepted. In this case the SNMP manager associated with this community cannot
manage the switch until the Status is changed back to Enable.
Default
private and public communities - enabled
other four - disabled
Format
snmp-server community mode
Mode Global Config
5.6.5.1 no snmp-server community mode
This command deactivates an SNMP community. If the community is disabled, no
SNMP requests using this community are accepted. In this case the SNMP manager
associated with this community cannot manage the switch until the Status is changed
back to Enable.
Format
no snmp-server community mode
Mode Global Config
5.6.6 snmp-server community ro
This command restricts access to switch information. The access mode is read-only
(also called public).
Format
snmp-server community ro
Mode Global Config
5.6.7 snmp-server community rw
This command restricts access to switch information. The access mode is read/write
(also called private).
Format
snmp-server community rw
Mode Global Config