Kontron AT8402 CLI - Manual (Page 138)

Quality of Service (QoS) Commands AT8402
AT8402 CLI Reference Manual Page 3 - 26
Format
no ip access-group in
Mode Interface Config
3.8.3 acl-trapflags
This command enables the ACL trap mode.
Default
disabled
Format
acl-trapflags
Mode Global Config
3.8.3.1 no acl-trapflags
This command disables the ACL trap mode.
Format
no acl-trapflags
Mode Global Config
3.8.4 show ip access-lists
This command displays an IP ACL is the number used to
identify the IP ACL.
Format
show ip access-lists
Mode Privileged EXEC
NOTE: Only the access list fields that you configure are displayed.
Rule Number The number identifier for each rule that is defined for the IP ACL.
Action
The action associated with each rule. The possible values are Permit or
Deny.
Match All Indicates whether this access list applies to every packet. Possible val-
ues are True or False.
Protocol The protocol to filter for this rule.
Source IP Address The source IP address for this rule.
Source IP Mask The source IP Mask for this rule.
Source L4 Port Keyword The source port for this rule.
Destination IP Address The destination IP address for this rule.
Destination IP Mask The destination IP Mask for this rule.
Destination L4 Port Keyword The destination port for this rule.
IP DSCP
The value specified for IP DSCP.
IP Precedence The value specified IP Precedence.
IP TOS
The value specified for IP TOS.
Log Displays when you enable logging for the rule.
Assign Queue The queue identifier to which packets matching this rule are assigned.