Kontron AT8402 CLI - Manual (Page 72)

Switching Commands AT8402
AT8402 CLI Reference Manual Page 2 - 40
2.10.8 dot1x port-control
This command sets the authentication mode to use on the specified port. Select
force-
unauthorized
to specify that the authenticator PAE unconditionally sets the controlled
port to unauthorized. Select
force-authorized
to specify that the authenticator PAE
unconditionally sets the controlled port to authorized. Select
auto
to specify that the
authenticator PAE sets the controlled port mode to reflect the outcome of the
authentication exchanges between the supplicant, authenticator and the authentication
server.
Default auto
Format
dot1x port-control
{force-unauthorized | force-authorized | auto}
Mode Interface Config
2.10.8.1 no dot1x port-control
This command sets the authentication mode on the specified port to the default value.
Format no dot1x port-control
Mode Interface Config
2.10.9 dot1x port-control all
This command sets the authentication mode to use on all ports. Select force-
unauthorized to specify that the authenticator PAE unconditionally sets the controlled
port to unauthorized. Select force-authorized to specify that the authenticator PAE
unconditionally sets the controlled port to authorized. Select
auto
to specify that the
authenticator PAE sets the controlled port mode to reflect the outcome of the
authentication exchanges between the supplicant, authenticator and the authentication
server.
Default auto
Format
dot1x port-control all
{force-unauthorized | force-authorized |
auto}
Mode Global Config
2.10.9.1 no dot1x port-control all
This command sets the authentication mode on all ports to the default value.
Format no dot1x port-control all
Mode Global Config
2.10.10 dot1x re-authenticate
This command begins the re-authentication sequence on the specified port. This
command is only valid if the control mode for the specified port is 'auto'. If the control
mode is not 'auto' an error will be returned.
Format
dot1x re-authenticate
<slot/port>
Mode Privileged EXEC