Kontron AT8402 CLI - Manual (Page 224)

Management Commands AT8402
AT8402 CLI Reference Manual Page 5 - 34
Default disabled (0)
Format
set watchdog bist
<0,60-6000>
set watchdog osloader
<0,120-6000>
set watchdog init <0,120-6000>
set watchdog application <0,120-6000>
set watchdog heartbeat
<0,1-6000>
Mode Privileged EXEC
5.12.2 show watchdog
This command displays the watchdog settings. It displays the values (or string
“disabled”) of different watchdog (during BIST, during loading of kernel and INITRD,
during startup of switching application and during normal execution of switching
application) and the heartbeat of the fpmux application.
Format
show watchdog
Mode Privileged EXEC
5.13 Diagnostics Commands
5.13.1 diagnostics
This command will start diagnostics. If “interactive” is specified the switch will be
restarted and the diagnostics loaded. The user gets a menu to select interactively a
scenario. A serial console is needed. Otherwise, if a scenario is specified, this scenario
is executed directly. You may start this scenario once or repeated for a time
(timedloop), for a number of repetitions (loop) or forever. The results are stored and
can be displayed by using “show logging diag-report”. Possible scenarios are “full” (all
test purposes except the destructive ones), “quickturn” (scenarios running fast) or
“write” (destructive scenarios).
Format
diagnostics interactive
diagnostics
diagnostics timedloop
<1-9999999>
diagnostics loop
<1-9999999>
diagnostics forever
Mode Privileged EXEC
5.13.2 copy nvram: diag-report url
This command will copy the tar.gz file containing the results of the last diagnostics run
to a remote TFTP server.
Format
copy nvram:diag-report
Mode Privileged EXEC
5.14 PCI express Commands
5.14.1 set board pcie upstream
This command sets the PCI Express port settings for AMC ports and update-channel
port. Only one port must be upstream and only one port must be non-transparent (or