Kontron AT8402 CLI - Manual (Page 126)

Quality of Service (QoS) Commands AT8402
AT8402 CLI Reference Manual Page 3 - 14
The value is specified as either an integer from 0 to 63, or symbolically
through one of the following keywords: af11, af12, af13, af21, af22, af23, af31, af32,
af33, af41, af42, af43, be, cs0, cs1, cs2, cs3, cs4, cs5, cs6, cs7, ef .
Format mark ip-dscp
Mode Policy-Class-Map Config
Incompatibilities Drop, Mark CoS, Mark IP Precedence, Police
3.4.7 mark ip-precedence
This command marks all packets for the associated traffic stream with the specified IP
Precedence value. The IP Precedence value is an integer from 0 to 7.
Format
mark ip-precedence <0-7>
Mode Policy-Class-Map Config
Policy Type In
Incompatibilities Drop, Mark CoS, Mark IP DSCP, Police
3.4.8 police-simple
This command is used to establish the traffic policing style for the specified class. The
simple form of the police command uses a single data rate and burst size, resulting in
two outcomes: conform and violate. The conforming data rate is specified in kilobits-
per-second (Kbps) and is an integer from 1 to 4294967295. The conforming burst size
is specified in kilobytes (KB) and is an integer from 1 to 128.
For each outcome, the only possible actions are drop, set-cos-transmit, set-dscp-
transmit, set-prec-transmit, or transmit. In this simple form of the police command, the
conform action defaults to transmit and the violate action defaults to drop.
For set-dscp-transmit, a value is required and is specified as either an
integer from 0 to 63, or symbolically through one of the following keywords: af11, af12,
af13, af21, af22, af23, af31, af32, af33, af41, af42, af43, be, cs0, cs1, cs2, cs3, cs4, cs5, cs6, cs7, ef .
For set-prec-transmit, an IP Precedence value is required and is specified as an integer
from 0-7.
For set-cos-transmit an 802.1p priority value is required and is specified as an integer
from 0-7.
Format
police-simple
{<1-4294967295> <1-128> conform-action {drop |
set-prec-transmit <0-7> | set-dscp-transmit <0-63> | set-cos-transmit
<0-7> | transmit} [violate-action {drop | set-prec-transmit <0-7> |
set-dscp-transmit <0-63> | set-cos-transmit <0-7> | transmit}]}
Mode Policy-Class-Map Config
Incompatibilities Drop, Mark (all forms)
3.4.9 policy-map
This command establishes a new DiffServ policy. The
>
parameter is a
case-sensitive alphanumeric string from 1 to 31 characters uniquely identifying the
policy. The type of policy is specific to the inbound traffic direction as indicated by the
in parameter.