Kontron AT8402 CLI - Manual (Page 51)

AT8402 Switching Commands
Page 2 - 19 AT8402 CLI Reference Manual
2.3.5 vlan ingressfilter
This command enables ingress filtering. If ingress filtering is disabled, frames received
with VLAN IDs that do not match the VLAN membership of the receiving interface
are admitted and forwarded to ports that are members of that VLAN.
Default disabled
Format
vlan ingressfilter
Mode Interface Config
2.3.5.1 no vlan ingressfilter
This command disables ingress filtering. If ingress filtering is disabled, frames
received with VLAN IDs that do not match the VLAN membership of the receiving
interface are admitted and forwarded to ports that are members of that VLAN.
Format
no vlan ingressfilter
Mode Interface Config
2.3.6 vlan makestatic
This command changes a dynamically created VLAN (one that is created by GVRP
registration) to a static VLAN (one that is permanently configured and defined). The
ID is a valid VLAN identification number. VLAN range is 2-4094.
Format
vlan makestatic
<2-4094>
Mode VLAN Config
2.3.7 vlan name
This command changes the name of a VLAN. The name is an alphanumeric string of
up to 32 characters, and the ID is a valid VLAN identification number. ID range is 1-
4094.
Default VLAN ID 1 - default
other VLANS - blank string
Format
vlan name
<2-4094>
Mode VLAN Config
2.3.7.1 no vlan name
This command sets the name of a VLAN to a blank string.
Format
no vlan name
<2-4094>
Mode VLAN Config
2.3.8 vlan participation
This command configures the degree of participation for a specific interface in a
VLAN. The ID is a valid VLAN identification number, and the interface is a valid
interface number
.
Format
vlan participation
{exclude | include | auto} <1-4094>