Kontron AT8402 CLI - Manual (Page 201)

AT8402 Management Commands
Page 5 - 11 AT8402 CLI Reference Manual
Default disabled
Format
ip ssh
Mode Privileged EXEC
5.4.1.1 no ip ssh
Use this command to disable SSH access to the system.
Format
no ip ssh
Mode Privileged EXEC
5.4.2 ip ssh protocol
This command is used to set or remove protocol levels (or versions) for SSH. Either
SSH1 (1), SSH2 (2), or both SSH 1 and SSH 2 (1 and 2) can be set.
Default
1 and 2
Format
ip ssh protocol
[1] [2]
Mode Privileged EXEC
5.4.3 ip ssh server enable
This command enables the IP secure shell server.
Default
disabled
Format
ip ssh server enable
Mode Privileged EXEC
5.4.3.1 no ip ssh server enable
This command disables the IP secure shell server.
Format
no ip ssh server enable
Mode Privileged EXEC
5.4.4 sshcon maxsessions
This command specifies the maximum number of SSH connection sessions that can be
established. A value of 0 indicates that no ssh connection can be established. The range
is 0 to 5.
Default
5
Format
sshcon maxsessions
<0-5>
Mode Privileged EXEC
5.4.4.1 no sshcon maxsessions
This command sets the maximum number of allowed SSH connection sessions to the
default value.
Format
no sshcon maxsessions
Mode Privileged EXEC