Dynojet 250iPX: Installation Guide - Manual (Page 77)

I N S T A L L A T I O N
Pit Covers Installation
Version 2 In Ground Model 200iPX/250iPX Motorcycle Dynamometer Installation Guide
2-55
12 Place the right pit cover on the iPX drum module uprights and align the right pit
cover with the middle pit cover.
13 Loosely install the right pit cover to the iPX module drum guard mounting
bracket using four 1/4-20 x 5/8-inch pan-head torx screws.
14 Loosely install the right pit cover to the iPX drum module uprights using four
3/8-16 x 1/2-inch button-head flange bolts.
15 Center the drum guard mounting bracket over the drum. Verify the drum does
not contact the mounting bracket.
16 Tighten all screws.
Figure 2-45: Install the Right Pit Cover to the iPX Drum Module
PD138