Sony CCD-F36 - Manual (Page 72)

Manual WltKe Batanoe Adfustment
To Adiuel tSe WhKa Balance Manually
While pfessing the small buttoa set the
POWER $NVltoi to CAMERA.
Set the AUTO LOCK switch to the
position.
Select the desMed white balance mode by
pressing the WHITE BAL button.
Each push ot the WHITE SAL button
cyclically changes Ihe intfcation insklo tho
vvowtindor.
No Indication (Auto) •• HOLD -• ^
L -VX .
For the color temperature and the while
balance aòlustmeni. see page 92.
To arQust №e white balaiKe precisely
1 Set Ihe WHITE
sal button to auto mode
(rto iriffication)
2 Point tho reardor to a white, flat obfect
such as a whte wall, paper, etc.
3 Press me WHTE BAL button (0 indicate
Ihe HOLD mark inside the vtewlinder.
The correct whlio batanoe i$ memorued
Notes
• When irm pownr Is lumed oil or the Ughi source
is changed, reset the HOLD n>ode again.
• The white baiaroe is related to back Ughi amt
shutter speed sdlustment When me snutier
spend is ad|u8l4d manuatly, II Ihe recorder Is
moved indoor to ouldow or wco versa, sol Ihe
AUTO LOCK swMch to AUTO LOCK end ressi it
to ino light podiion again.
• When the records* nas been nwved indoor to
outdoor, or vice verss. slide me STAN06T
swiicli up ang pomi me lecorder to a white
oCeacI
fai idiou 15 seconds so that Ihe while
bfttance IS adiuitsd property
44