Bio-Rad Bio-Plex Software® Upgrades and Conversions - Manual (Page 91)

Protocol Window
79
Click the Enter Standards Info button in the Protocol Settings pane to enter
information about your standards.
Figure 68. Entering information about standards
The Enter Standards Info window allows you to define standards on your
current microtiter plate, and/or import external standards data from another
plate. Use the tabs above the data fields to select between standards on the
current plate and external standards.
NOTE: You can define standards on the current plate and import external
standards in the same protocol. This is useful if you want to run standards for
some analytes on the current plate, but include external standards for other
analytes in your concentration calculations. Note that if external standards
and current standards are defined for the same analyte, the external
standards will always be used to calculate the concentrations of that analyte.
Standard Lots
You can create, reuse, and import standard lots to ensure repeatable results
between experiments and/or researchers in a workgroup.
This function eliminates the need for you to enter or re-enter this data
manually.
Click the Enter Standards Info button in the Protocol Settings pane. Choose
the Standards Info tab.
BioPlex_6.book Page 79 Friday, September 23, 2011 11:55 AM